Eni Mix 2T

EniEni Mix 2T linemotorcycles

An API TC oil for two-stroke scooter and motorcycle engines, for pre-mixing with fuel or for separate lubrication.

Classification
Product line Eni Mix 2T 1 oil
Intended use motorcycles
API class What API means
Typical properties
Viscosity at 40 °C 62 mm²/s
Viscosity at 100 °C 9 mm²/s
Viscosity index 121
Pour point -28 °C
Flash point 111 °C
Density 871 kg/m³

Description

Eni Mix 2T is an oil for air- and liquid-cooled two-stroke engines in scooters and motorcycles. It can be pre-mixed with the fuel or poured into the reservoir of a separate oil-injection system.

The oil meets API TC. Its additive package is low in ash, which reduces spark plug fouling and carbon build-up in the cylinder ports.

Typical figures: kinematic viscosity 62 mm²/s at 40 °C and 9 mm²/s at 100 °C, viscosity index 121, pour point -28 °C, flash point 111 °C.

Application

Air- and liquid-cooled two-stroke scooter and motorcycle engines, both in a pre-mixed fuel blend and in separate oil-injection systems.

Worth knowing

The only class in the Mix 2T data sheet is API TC, and among Eni’s two-stroke oils in the catalogue it alone has no JASO class. The ASTM specification that described TC oils was withdrawn without replacement, and the mark on its own says little, whereas smoke, deposits and exhaust blocking are exactly what the JASO tests assess. So what counts is the JASO or ISO class named in the engine’s manual, not TC. There is more on what each of these classes tests, and on checking a JASO code on a can against the list, in the article on two-stroke oil classes: JASO, ISO and API TC.

If a scooter’s manual names JASO FC, Eni’s i-Ride scooter 2T has that class alongside the same API TC. It is thicker: 10.3 mm²/s at 100 °C against 9 mm²/s for Mix 2T, and its pour point is -15 °C instead of -28 °C.

Data current as of Check the label and the current product data sheet before you buy.

Sources

Related articles

Other Eni oils

All 140 oils

  • Eni i-Ride moto 10W-30

    A synthetic 10W-30 engine oil rated API SN and JASO MA2 for the four-stroke engines of modern motorcycles.

    • API SN
    • JASO MA2

  • Eni i-Ride moto 10W-40

    A synthetic 10W-40 engine oil rated API SN and JASO MA2 for the four-stroke engines of new-generation motorcycles.

    • API SN
    • JASO MA2

  • Eni i-Ride moto 15W-50

    A synthetic 15W-50 engine oil rated API SN and JASO MA2 for four-stroke motorcycle engines.

    • API SN
    • JASO MA2

  • Eni i-Ride moto 20W-50

    A fully synthetic 20W-50 engine oil rated API SN and JASO MA2 for high-output four-stroke motorcycle engines.

    • API SN
    • JASO MA2