Eni Snow racing 2T
A fully synthetic low-smoke oil rated API TC, JASO FC and ISO-L-EGD for two-stroke snowmobile engines.
| Classification | |
|---|---|
| Product line | Eni Snow racing 2 oils |
| Base oil | fully synthetic |
| Intended use | motorcycles |
| API class | What API means |
| JASO class | |
| Approvals | |
| Meets the requirements of | What an approval means |
| Typical properties | |
| Viscosity at 40 °C | 72 mm²/s |
| Viscosity at 100 °C | 11.1 mm²/s |
| Viscosity index | 146 |
| Pour point | -45 °C |
| Flash point | 104 °C |
| Density | 869 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Eni Snow racing 2T is a fully synthetic oil from the Snow racing line for two-stroke snowmobile engines; Eni lists it in its scooters and motorcycles category. The oil produces little smoke, is formulated to work with exhaust catalysts and stays fluid in hard frost.
It is rated API TC, JASO FC and ISO-L-EGD; the maker quotes no manufacturer approvals.
Typical figures: kinematic viscosity 72 mm²/s at 40 °C and 11.1 mm²/s at 100 °C, viscosity index 146, pour point -45 °C, flash point 104 °C, density 869 kg/m³.
Application
Two-stroke snowmobile engines; Eni lists the oil in its scooters and motorcycles category.
Worth knowing
The pour points of the Eni two-stroke oils in the catalogue differ widely: -45 °C here, -28 °C for Mix 2T and -15 °C for i-Ride scooter 2T, although the latter’s viscosity at 40 °C is almost the same, 73 mm²/s against 72 mm²/s. Eni i-Ride racing 2T has the same -45 °C and the same viscosity figures, but with a JASO FD that this oil lacks: where the manual names FD, look for FD. The name of the line is no guide either. Snow racing 4T 0W-40, rated API SN, is meant for four-stroke engines and shares no codes with this oil.
The pair FC and ISO-L-EGD in one data sheet means two separate markings. The usual simplification pairs FC with EGC and FD with EGD, so the code to follow is the one in the snowmobile’s manual. The data sheet gives neither the delivery method, premix or separate tank, nor the ratio; take both from the same manual. How to read all three codes, API TC included, and where to check the nine-character JASO code, is explained in the article on two-stroke oil and the JASO framework.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
Other Eni oils
All 140 oils-
Eni Snow racing 4T 0W-40
A 0W-40 engine oil rated API SN for four-stroke snowmobile engines that stays fluid in hard frost.
- API SN
-
Eni i-Ride moto 10W-30
A synthetic 10W-30 engine oil rated API SN and JASO MA2 for the four-stroke engines of modern motorcycles.
- API SN
- JASO MA2
-
Eni i-Ride moto 10W-40
A synthetic 10W-40 engine oil rated API SN and JASO MA2 for the four-stroke engines of new-generation motorcycles.
- API SN
- JASO MA2
-
Eni i-Ride moto 15W-50
A synthetic 15W-50 engine oil rated API SN and JASO MA2 for four-stroke motorcycle engines.
- API SN
- JASO MA2