Eni i-Ride scooter MB 10W-30
A synthetic 10W-30 engine oil rated API SJ and JASO MB for four-stroke scooters with automatic transmission.
| Classification | |
|---|---|
| Product line | Eni i-Ride scooter 4 oils |
| SAE viscosity | 10W-30What SAE means |
| Base oil | synthetic |
| Intended use | motorcycles |
| API class | What API means |
| JASO class | |
| Typical properties | |
| Viscosity at 40 °C | 73 mm²/s |
| Viscosity at 100 °C | 11.2 mm²/s |
| Viscosity index | 145 |
| CCS viscosity at -25 °C | 6800 mPa·s |
| Pour point | -21 °C |
| Flash point | 235 °C |
| Density | 853 kg/m³ |
Description
Eni i-Ride scooter MB 10W-30 is a synthetic oil from the i-Ride scooter line for the four-stroke engines of scooters with automatic transmission. It suits the frequent stops and restarts of city riding, including engines with a start-stop system.
The oil meets API SJ and JASO MB; the MB class is intended for scooters whose clutch does not run in the engine oil. The data sheet lists no official approvals from motorcycle manufacturers.
Typical figures: kinematic viscosity 73 mm²/s at 40 °C and 11.2 mm²/s at 100 °C, viscosity index 145, pour point -21 °C, flash point 235 °C, density 853 kg/m³.
Application
Four-stroke engines of scooters with automatic transmission, including those with start-stop, in city use.
Worth knowing
The Eni data sheet sets out the limits of this oil’s use plainly: its formulation is chosen only for scooter engines with a variator (CVT), as opposed to four-stroke engines whose clutch runs in the oil. Eni itself calls it a reduced-friction oil, and reduced friction is the mark of the JASO MB class. The overview of the JASO motorcycle classes covers how JASO divides oils by clutch friction and why MB is wrong for an engine built for MA. Of the Eni oils in the catalogue, only this one is recorded as MB.
When a scooter’s manual calls for MA2, the i-Ride scooter line has that class in the 10W-40 and 15W-50, both with API SM. The motorcycle i-Ride moto 10W-30 combines the 10W-30 viscosity with JASO MA2 and API SN.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
Other Eni oils
All 140 oils-
Eni i-Ride scooter 10W-40
A synthetic 10W-40 engine oil rated API SM and JASO MA2 for four-stroke scooters, including those with start-stop.
- API SM
- JASO MA2
-
Eni i-Ride scooter 15W-50
A synthetic 15W-50 engine oil rated API SM and JASO MA2 for the four-stroke engines of new and older scooters.
- API SM
- JASO MA2
-
Eni i-Ride scooter 2T
A synthetic oil for two-stroke scooter engines, rated API TC and JASO FC, with very low smoke.
- API TC
- JASO FC
-
Eni i-Ride moto 10W-30
A synthetic 10W-30 engine oil rated API SN and JASO MA2 for the four-stroke engines of modern motorcycles.
- API SN
- JASO MA2
Other 10W-30 oils
-
Elf
Elf Moto 4 Maxi Tech 10W-30
Synthetic fuel-saving 10W-30 oil for powerful four-stroke motorcycles, rated API SJ and JASO MA.
- API SJ
- JASO MA
-
Elf
Elf Moto 4 Scooter 10W-30
Mineral 10W-30 oil for four-stroke scooters with automatic transmissions, rated API SL and JASO MB.
- API SL
- JASO MB
-
Elf
Elf Moto 4 Tourer SL 10W-30
Fully synthetic 10W-30 oil for four-stroke touring motorcycles, rated API SL and JASO MA.
- API SL
- JASO MA
-
Elf
Elf Moto 4 Tourer XP FE 10W-30
Fully synthetic fuel-saving 10W-30 oil for touring motorcycles, rated API SP and JASO MA2.
- API SP
- JASO MA2