Elf Performance Pro 900 10W-40
Low-SAPS 10W-40 engine oil rated ACEA E4, E6, E7, E9 and API CJ-4 for truck diesels up to Euro 6.
| Classification | |
|---|---|
| Product line | Elf Performance Pro 9 oils |
| SAE viscosity | 10W-40What SAE means |
| Intended use | commercial vehicles |
| API class | What API means |
| ACEA class | What ACEA means |
| Approvals | |
| Meets the requirements of |
|
| Typical properties | |
| Viscosity at 40 °C | 91 mm²/s |
| Viscosity at 100 °C | 13.7 mm²/s |
| Viscosity index | 153 |
| Pour point | -39 °C |
| Flash point | 235 °C |
| Base number (TBN) | 10 mg KOH/g |
| Sulphated ash | 1 % |
| Density | 864 kg/m³ |
| Pack sizes | 208 L |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Elf Performance Pro 900 10W-40 is a low-SAPS engine oil for truck diesels up to Euro 6 (Mercedes-Benz, DAF, some Scania and MAN engines) and most Euro 5 trucks. Its low-ash formulation protects particulate filters.
It is rated ACEA E4, E6, E7 and E9 and API CJ-4, CI-4 Plus, CI-4 and CH-4. No official carmaker approvals are listed. The maker states that it meets Cummins CES 20081, DTFR 15C110, Mack EO-O Premium Plus, MAN M 3271-1 and M 3477, Renault Trucks RLD-3 and Volvo VDS-4; for Iveco it is listed against the TLS E9 standard.
Typical figures: 13.7 mm²/s at 100 °C, viscosity index 153, base number 10 mg KOH/g, sulphated ash 1 %. Available in 208 litre drums.
Application
Truck diesels up to Euro 6 (Mercedes-Benz, DAF, some Scania and MAN engines) and most Euro 5 trucks.
Worth knowing
The Ukrainian data sheet for this oil is laid out in such a way that some of the numbers, Mack EO-O Premium Plus and MAN M 3477 among them, end up under the heading “Manufacturer approvals”. The English data sheet and Elf’s catalogue page put every one of these numbers, from Cummins CES 20081 to Volvo VDS-4, under “Meets the requirement of”, so none of them is a vehicle maker’s approval.
For an extended drain interval the distinction matters: as the article on Daimler Truck, Volvo and MAN truck approvals reminds us, the interval in the service book only applies with an oil approved to the relevant standard. Elf Performance Pro 2000 10W-40 lists DTFR 15C110 and Renault Trucks RLD-3 as actual approvals, and instead of VDS-4 it carries an approved Volvo VDS-4.5, which Volvo also allows in engines that called for VDS-4. The viscosity is the same and both have E6 and E9, but the 2000 10W-40 lacks the E4 class claimed for this oil.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) total-cdn-lmdb.afineo.io
- Technical data sheet (TDS) total-cdn-lmdb.afineo.io
- Product page on the manufacturer’s site lubricants.catalog.elf.com
- Product page on the manufacturer’s site lubricants.catalog.elf.com
Other Elf oils
All 141 oils-
Elf Performance Pro 2000 10W-40
Low-SAPS 10W-40 oil for truck diesel and gas engines, rated ACEA E6, E11 and API CK-4, with Volvo VDS-4.5 and Mack EOS-4.5 approvals.
- Renault Trucks RLD-3
- Mack EOS-4.5
- ACEA E11
- ACEA E6
-
Elf Performance Pro 700 10W-40
10W-40 engine oil for truck diesels, rated ACEA E7, A3/B4 and API CI-4, with MB 228.3, Volvo VDS-3 and Mack EO-N approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA A3/B4
- ACEA E7
-
Elf Performance Pro 800 10W-40
High-base-number 10W-40 engine oil for truck diesels, rated ACEA E4 and E7, with MAN M 3277, Scania LDF-3 and Volvo VDS-3 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E4
- ACEA E7
-
Elf Performance Pro 3000 5W-30
Fully synthetic low-SAPS 5W-30 oil for Euro VI diesels, rated ACEA E6, E11 and API CK-4, with Volvo VDS-4.5 and MAN M 3677 approvals.
- Renault Trucks RLD-3
- Mack EOS-4.5
- ACEA E11
- ACEA E6
Other 10W-40 oils
-
Liqui Moly
Liqui Moly Top Tec Truck 4050 10W-40
Synthetic low-ash 10W-40 oil for Euro IV-VI truck and bus diesels, with ACEA E6/E11 and API CK-4 and Volvo VDS-4.5 and Mack EOS-4.5 approvals.
- Renault Trucks RLD-3
- Mack EOS-4.5
- ACEA E6
- ACEA E7
-
Liqui Moly
Liqui Moly Truck Low-friction Motor Oil 10W-40
Synthetic full-SAPS 10W-40 oil for truck diesels and mixed fleets, with ACEA E7 and API CI-4 and Volvo VDS-3 and Mack EO-N approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA A3
-
Mobil
Mobil Delvac HD 10W-40
Part-synthetic low-SAPS 10W-40 for Euro V/VI truck diesels with exhaust after-treatment, approved to MTU Oil Category 3.1.
- MTU Oil Category 3.1
- ACEA E6
- MAN M 3477 (no official approval)
- DAF Extended Drain (no official approval)
-
Mobil
Mobil Delvac Light Commercial Vehicle 10W-40
partly verified: some specifications could not be confirmed from an official source
10W-40 engine oil for light commercial vehicles with diesel and petrol engines, including light vehicles that require API CI-4 or SL.
- API CI-4
- API SL