77 Lubricants Mono Engine Oil CF 20W-20
Mineral API CF-4 and ACEA E2 20W-20 diesel oil for on- and off-road equipment, at the MB 228.1 and MAN 271 level.
| Classification | |
|---|---|
| Product line | 77 Lubricants Mono Engine Oil 7 oils |
| SAE viscosity | 20W-20What SAE means |
| Base oil | mineral |
| Intended use | commercial vehicles |
| API class | What API means |
| ACEA class | What ACEA means |
| Approvals | |
| Meets the requirements of |
|
| Typical properties | |
| Viscosity at 40 °C | 67.7 mm²/s |
| Viscosity at 100 °C | 9 mm²/s |
| Viscosity index | 108 |
| Pour point | -33 °C |
| Flash point | >201 °C |
| Base number (TBN) | 11.8 mg KOH/g |
| Sulphated ash | 1.5 % |
| Density | 889 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
77 Lubricants Mono Engine Oil CF 20W-20 is a mineral engine oil of the SAE 20W-20 viscosity grade for diesel engines in on- and off-road equipment working under heavy load.
It is rated API CF-4, API SG and ACEA E2. It holds no official approvals; the maker claims compliance with MB 228.0, MB 228.1, MAN 270, MAN 271, Volvo VDS, Deutz DQC I-02 and ZF TE-ML 04A, 04P and 07D.
Typical figures: viscosity 9 mm²/s at 100 °C, viscosity index 108, base number 11.8 mg KOH/g, sulphated ash 1.5 %, pour point -33 °C.
Application
Diesel engines in on- and off-road equipment for which an API CF-4 oil is specified.
Worth knowing
The data sheet backs both halves of the name 20W-20 with figures: a CCS viscosity of 3,780 mPa·s at -15 °C is within the 9,500 mPa·s limit of the 20W winter grade, and 9 mm²/s at 100 °C stays below the upper SAE 20 limit of 9.3 mm²/s. The limits of every grade are collected in the viscosity value table. The pour point of -33 °C plays no part in this comparison: SAE J300 does not use it, and it is no safety margin for a cold start.
By its codes alone this oil cannot be told apart from CF 10W: the list is the same and the base number is also 11.8 mg KOH/g, so the difference lies in viscosity. Among the ZF codes in this data sheet, 20W-20 viscosity is named only in TE-ML 07D, for HL and AVG gearboxes and HC hydrostatic drives; for 04A and 04P ZF describes other SAE grades. Sulphated ash is 1.5 %, while in CF 40 it reaches 1.85 %.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) 77lubricants.nl
- Product page on the manufacturer’s site 77lubricants.nl
Other 77 Lubricants oils
All 131 oils-
77 Lubricants Mono Engine Oil CF 10W
Single-grade SAE 10W mineral oil for commercial diesel engines: API CF-4, ACEA E2, MB 228.1 and MAN 271 level.
- ACEA E2
- API CF-4
- API SG
- MB 228.1 (no official approval)
-
77 Lubricants Mono Engine Oil CF 30
Single-grade SAE 30 mineral oil to API CF-4 and ACEA E2 for diesel engines in lorries and off-highway machinery.
- ACEA E2
- API CF-4
- API SG
- API CH-4
-
77 Lubricants Mono Engine Oil CF 40
Single-grade SAE 40 mineral oil to API CF-4 and ACEA E2 for commercial diesel engines working on and off the road.
- ACEA E2
- API CF-4
- API SG
- API CH-4
-
77 Lubricants Mono Engine Oil CB/SB 50
Single-grade SAE 50 mineral oil to API CB and API SB for petrol and diesel engines of early design.
- API CB
- API SB
Other 20W-20 oils
-
Aral
Aral Turboral 20W-20
partly verified: some specifications could not be confirmed from an official source
Turboral-line 20W-20 engine oil for heavy-duty equipment, for which official sources currently offer only a safety data sheet.