Eni i-Sint tech P 0W-20
Fully synthetic 0W-20 car engine oil rated ACEA C5/C6 and API SP, meeting the requirements of PSA B71 2010 and Fiat 9.55535-DM1.
| Classification | |
|---|---|
| Product line | Eni i-Sint tech 18 oils |
| SAE viscosity | 0W-20What SAE means |
| Base oil | fully synthetic |
| Intended use | passenger cars |
| API class | What API means |
| ACEA class | What ACEA means |
| Approvals | |
| Meets the requirements of |
|
| Typical properties | |
| Viscosity at 40 °C | 42 mm²/s |
| Viscosity at 100 °C | 8.2 mm²/s |
| Viscosity index | 170 |
| CCS viscosity at -35 °C | 5890 mPa·s |
| Pour point | -42 °C |
| Flash point | 218 °C |
| Base number (TBN) | 10 mg KOH/g |
| Density | 845 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Eni i-Sint tech P 0W-20 is a fully synthetic engine oil for petrol and diesel car engines, chiefly those of the Stellantis brands. It may also be used in hybrids where the vehicle manufacturer permits.
The oil is rated ACEA C5 and C6 and API SP. According to its maker, it meets the requirements of PSA B71 2010, Fiat 9.55535-DM1 and Fiat 9.55535-GSX, without formal vehicle-manufacturer approval.
Typical figures: kinematic viscosity 8.2 mm²/s at 100 °C, viscosity index 170, pour point -42 °C, flash point 218 °C, base number 10 mg KOH/g and cold-cranking viscosity 5,890 mPa·s at -35 °C. The maker cites protection against low-speed pre-ignition (LSPI) in turbocharged direct-injection petrol engines.
Application
Petrol and direct-injection diesel car engines that call for a 0W-20 with an HTHS viscosity of at least 2.6 mPa·s, notably Stellantis engines specifying PSA B71 2010.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
Other Eni oils
All 140 oils-
Eni i-Sint tech VK 0W-20
Fully synthetic 0W-20 engine oil with official VW 508.00 and 509.00 approvals for Volkswagen Group cars.
- VW 508.00
- VW 509.00
- ACEA C5
- ACEA C6
-
Eni i-Sint tech VV 0W-20
Synthetic low-SAPS 0W-20 engine oil rated ACEA C5 for Volvo engines, meeting the requirements of Volvo VCC RBS0-2AE.
- ACEA C5
- Volvo VCC RBS0-2AE (no official approval)
-
Eni i-Sint tech 0W-30
Fully synthetic 0W-30 engine oil with official VW 503.00, 506.00 and 506.01 approvals for Volkswagen vehicles on extended service intervals.
- VW 503.00
- VW 506.00
- VW 506.01
-
Eni i-Sint tech F 0W-30
Fully synthetic 0W-30 engine oil rated ACEA C2 for Ford and Jaguar Land Rover engines, meeting Ford WSS-M2C950-A and JLR STJLR.03.5007.
- ACEA C2
- JLR STJLR.03.5007 (no official approval)
- Ford WSS-M2C950-A (no official approval)
Other 0W-20 oils
-
Liqui Moly
Liqui Moly Leichtlauf Performance 0W-20
Fully synthetic low-SAPS 0W-20 oil for petrol, diesel and hybrid passenger cars, to ACEA C5/C6 and API SP.
- ACEA C5
- ACEA C6
- API SP
-
Liqui Moly
Liqui Moly Special Tec T3210 0W-20
Fully synthetic all-season 0W-20 oil for petrol and hybrid cars of Asian and American makes, to API SP and ILSAC GF-6A.
- API SP
- API SN
- API SN Plus
- ILSAC GF-6A
-
Liqui Moly
Liqui Moly Top Tec 6200 0W-20
Fully synthetic 0W-20 ACEA C5 oil with VW 508.00/509.00 and Porsche C20 approvals for petrol and diesel engines with a particulate filter.
- Porsche C20
- VW 508.00
- ACEA C5
- VW 509.00
-
Liqui Moly
Liqui Moly Top Tec 6310 0W-20
Fully synthetic 0W-20 ACEA C5/C6 and API SP oil for Stellantis PureTech and BlueHDi engines, including hybrids.
- PSA B71 2010
- ACEA C5
- ACEA C6
- API SP
