Eni Motor Oil HD 20W-60
A very thick 20W-60 engine oil rated API SJ and CF for petrol and diesel engines that accept an oil of this level.
| Classification | |
|---|---|
| Product line | Eni i-Sigma performance 12 oils |
| SAE viscosity | 20W-60What SAE means |
| Intended use | commercial vehicles |
| API class | What API means |
| Typical properties | |
| Viscosity at 100 °C | 22.90 mm²/s |
| CCS viscosity at -15 °C | 7590 mPa·s |
| Pour point | -20 °C |
| Flash point | 238 °C |
| Base number (TBN) | 5.5 mg KOH/g |
| Density | 890 kg/m³ |
Description
Eni Motor Oil HD 20W-60 is an engine oil in the very thick 20W-60 viscosity grade for petrol and diesel engines. Its detergent-dispersant additives hold back the formation of lacquer and sludge in the engine.
The oil is rated API SJ and CF; the list contains no car maker approvals and no claims against their specifications. It is used where the engine maker permits a 20W-60 oil of this level.
Typical figures: kinematic viscosity 22.90 mm²/s at 100 °C, base number 5.5 mg KOH/g, pour point -20 °C, flash point 238 °C.
Application
Petrol and diesel engines for which a 20W-60 oil rated API SJ and CF is acceptable.
Worth knowing
The specifications section of Eni’s data sheet for this oil is a single line: API SJ/CF. Both classes sit on the early rungs of the API ladder: the institute has already declared CF obsolete, and SJ oils, in API’s current wording, are for engines of model year 2001 and older. The article on the API SJ class explains what the SJ petrol class requires and which vehicles it still suits today.
The i-Sigma performance line, where the catalogue places Motor Oil HD, has no second 20W-60. The nearest in viscosity at 100 °C, Eni i-Sigma high mileage 25W-60, has a longer list (ACEA E3 and B3, API CG-4, stated compliance with MB 228.1 and MAN M 3275), but it is a different SAE grade: its data sheet measures cold cranking viscosity at -10 °C (12,300 mPa·s), while the HD 20W-60 sheet does so at -15 °C (7,590 mPa·s). Its base number is different too, 8.4 mg KOH/g against 5.5, so a similar figure at 100 °C does not make it a substitute.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
Other Eni oils
All 140 oils-
Eni i-Sigma performance E4 10W-40
A synthetic 10W-40 engine oil rated ACEA E4 and E7 for truck diesels, meeting the requirements of MAN M 3277 and MTU Oil Category 3.
- ACEA E4
- ACEA E7
- DTFR 15B110 (no official approval)
- MAN M 3277 (no official approval)
-
Eni i-Sigma special M 10W-40
A synthetic 10W-40 engine oil for heavy-duty diesel engines, meeting the requirements of MB 228.3.
- MB 228.3 (no official approval)
-
Eni i-Sigma performance CF HBN 15W-40
A 15W-40 engine oil rated API CF-4 and ACEA E2, with a high base number, meeting the requirements of MB 228.1 and MAN M 271.
- ACEA E2
- ACEA B2
- API CF-4
- API SG
-
Eni i-Sigma performance CH HBN 15W-40
A high-base-number mineral 15W-40 engine oil for turbocharged lorry diesels, rated ACEA E7 and API CH-4 and meeting MB 228.3.
- ACEA E7
- ACEA E5
- ACEA E3
- ACEA B3