Fuchs TITAN SUPERSYN D1 5W-30
Synthetic 5W-30 for car petrol engines, carrying a GM dexos1 Gen 3 licence and rated API SP RC and ILSAC GF-6A.
| Classification | |
|---|---|
| Product line | Fuchs TITAN SUPERSYN 14 oils |
| SAE viscosity | 5W-30What SAE means |
| Base oil | synthetic |
| Intended use | passenger cars |
| API class | What API means |
| ILSAC class | |
| Approvals | |
| Manufacturer approvals | What an approval means |
| Meets the requirements of |
|
| Typical properties | |
| Viscosity at 40 °C | 58.5 mm²/s |
| Viscosity at 100 °C | 10.57 mm²/s |
| Viscosity index | 173 |
| HTHS viscosity | ≥2.9 mPa·s |
| Pour point | -42 °C |
| Sulphated ash | ≤1 % |
| Density | 850 kg/m³ |
| Pack sizes | 1 L, 4 L, 5 L, 20 L, 60 L, 205 L |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Fuchs TITAN SUPERSYN D1 5W-30 is a synthetic engine oil from the TITAN SUPERSYN line for passenger car petrol engines, above all those that call for a dexos1-licensed oil.
It holds an official GM dexos1 Gen 3 licence and is rated API SP RC, API SN Plus RC, ILSAC GF-6A and ILSAC GF-5. FUCHS recommends it, without formal approval, for Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C929-A, Ford WSS-M2C946-A, Ford WSS-M2C946-B1, Ford WSS-M2C961-A1, GM 4718M, GM 6094M and VWC 53034.
Typical data-sheet figures: 10.57 mm²/s at 100 °C, viscosity index 173, HTHS viscosity at least 2.9 mPa·s, sulphated ash no more than 1 %, pour point -42 °C. Pack sizes range from 1 to 205 litres.
Application
Car petrol engines, chiefly in GM vehicles, for which the manufacturer requires a dexos1-licensed oil.
Worth knowing
Fuchs links the oil’s wide range of applications to ILSAC GF-6A: according to the data sheet, it is often taken as the baseline requirement of Toyota, Honda, Hyundai/Kia, Nissan, Mazda and Chrysler. It also gives the result of the Sequence VID engine test (ASTM D7589): fuel economy at least 3.1 % better than the reference oil. Chrysler MS-6395 and Fiat 9.55535-CR1 in the list mean the same thing: going by the oil data sheets, CR1 is Fiat’s own entry for that same Chrysler requirement, as explained in the article on Fiat 9.55535 codes.
This oil shares no codes with TITAN SUPERSYN 5W-30, even though the line and the SAE grade are the same. That oil is rated ACEA A3/B4, holds the approvals MB 229.3, VW 502.00, VW 505.00, Renault RN0700 and Renault RN0710, and is also meant for diesels. The Fuchs data sheet, by contrast, explicitly rules this one out for diesel engines, and its only approval is GM dexos1 Gen 3.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) fuchs-lubricants.ro
- Product page on the manufacturer’s site fuchs.com
- Product page on the manufacturer’s site fuchs.com
- Product page on the manufacturer’s site fuchs.com
- Manufacturer’s catalogue fuchs.com
Other Fuchs oils
All 59 oils-
Fuchs TITAN SUPERSYN 5W-30
Synthetic full-SAPS 5W-30 for petrol and diesel cars, with official MB 229.3, VW 502.00/505.00 and Renault RN0700/RN0710 approvals.
- VW 505.00
- Renault RN0700
- ACEA A3/B4
- API SL
-
Fuchs TITAN SUPERSYN F ECO-DT 5W-30
ACEA A5/B5 5W-30 for Ford petrol engines, Duratorq diesels and JLR engines, with official JLR STJLR.03.5003 approval.
- JLR STJLR.03.5003
- ACEA A5/B5
- ACEA A1/B1
- API SL
-
Fuchs TITAN SUPERSYN D1 0W-20
Synthetic 0W-20 engine oil for petrol engines, with a GM dexos1 Gen 3 licence and API SP RC and ILSAC GF-6A ratings.
- GM dexos1 Gen 3
- API SP RC
- API SN Plus RC
- ILSAC GF-6A
-
Fuchs TITAN SUPERSYN F ECO-FE 0W-30
Synthetic low-SAPS ACEA C2 0W-30 for Ford diesels, meeting Ford WSS-M2C950-A and holding JLR STJLR.03.5007 approval.
- JLR STJLR.03.5007
- ACEA C2
- Ford WSS-M2C950-A (no official approval)
- VWC 53035 (no official approval)
Other 5W-30 oils
-
Elf
Elf Evolution 900 USX 5W-30
Synthetic API SP and ILSAC GF-6A 5W-30 oil for modern petrol engines, with official GM dexos1 Gen 3 and Ford WSS-M2C961-A1 approvals.
- GM dexos1 Gen 3
- Ford WSS-M2C961-A1
- API SP
- API SQ
-
BP
BP Visco 5000 DX 5W-30
Synthetic 5W-30 engine oil to API SQ and ILSAC GF-7 with GM dexos1 Gen 3 approval for petrol engines.
- GM dexos1 Gen 3
- API SQ
- ILSAC GF-7
-
Liqui Moly
Liqui Moly Longlife III 5W-30
Synthetic low-SAPS 5W-30 oil for VW Group engines on flexible service, to ACEA C3, with VW 504.00/507.00 and BMW Longlife-04 approvals.
- BMW Longlife-04
- VW 504.00
- ACEA C3
- API SN
-
Liqui Moly
Liqui Moly Longtime High Tech 5W-30
Synthetic mid-SAPS 5W-30 engine oil for extended drain intervals, with ACEA C2 and C3 and BMW Longlife-04 and MB 229.51 approvals.
- MB 229.51
- BMW Longlife-04
- ACEA C2
- ACEA C3
Oils with the same approvals
-
Motul
Motul 8100 ECO-LITE GEN3 5W-30
partly verified: some specifications could not be confirmed from an official source
Fully synthetic fuel-saving 5W-30 petrol engine oil rated API SQ RC and ILSAC GF-7A, with GM dexos1 Gen 3 approval.
- GM dexos1 Gen 3
- API SQ RC
- ILSAC GF-7A
- Chrysler MS-6395 (no official approval)
-
Mobil
Mobil 1 x1 5W-30
Fully synthetic 5W-30 for petrol and diesel cars, licensed to GM dexos1 Gen 3 and rated ILSAC GF-7A and API SQ.
- GM dexos1 Gen 3
- VWC 53034
- ACEA C2
- ACEA A5/B5
-
Mobil
Mobil Super 3000 Formula D1 5W-30
Fully synthetic 5W-30 oil for GM, Ford and Chrysler cars, with GM dexos1 Gen 3 and VWC 53034 approvals, rated API SP and ILSAC GF-6A.
- GM dexos1 Gen 3
- VWC 53034
- API SP
- API SP RC
-
Mobil
Mobil 1 0W-20
Fully synthetic low-viscosity 0W-20 for passenger-car petrol engines, licensed to GM dexos1 Gen 3 and rated API SQ and ACEA C5.
- GM dexos1 Gen 3
- ACEA C5
- API SJ
- API SL
