77 Lubricants Motor Oil ASP 5W-30
Fully synthetic mid-SAPS API SP and ACEA C2/C3 5W-30 engine oil meeting the requirements of PSA B71 2290.
| Classification | |
|---|---|
| Product line | 77 Lubricants Motor Oil ASP 1 oil |
| SAE viscosity | 5W-30What SAE means |
| Base oil | fully synthetic |
| Intended use | passenger cars |
| API class | What API means |
| ACEA class | What ACEA means |
| Approvals | |
| Meets the requirements of | What an approval means |
| Typical properties | |
| Viscosity at 40 °C | 66.1 mm²/s |
| Viscosity at 100 °C | 11.5 mm²/s |
| Viscosity index | 169 |
| Pour point | -33 °C |
| Flash point | >201 °C |
| Base number (TBN) | 9.6 mg KOH/g |
| Sulphated ash | 0.8 % |
| Density | 854 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
77 Lubricants Motor Oil ASP 5W-30 is a fully synthetic engine oil from the Motor Oil ASP line with a medium content of sulphated ash, phosphorus and sulphur (mid-SAPS), for petrol and diesel engines in cars and vans.
It is rated API SP, ACEA C2 and C3. It holds no official approvals; the maker states that it meets the requirements of PSA B71 2290 and Iveco 18-1811 SC1.
The formulation is designed to save fuel, and the maker allows extended drain intervals where the vehicle manufacturer permits them.
Typical data-sheet figures: kinematic viscosity 11.5 mm²/s at 100 °C, viscosity index 169, pour point -33 °C, base number 9.6 mg KOH/g, sulphated ash 0.8 %.
Application
Modern petrol and diesel cars and vans that call for PSA B71 2290 or ACEA C2.
Worth knowing
The 77 Lubricants data sheet lists every code in a single block under the word “exceeds”, from API SP to Iveco 18-1811 SC1, so PSA B71 2290 here is a statement by the oil’s maker, not a Stellantis approval. Among the brand’s 5W-30 oils, code 2290 is also claimed by Motor Oil SFP 5W-30, but that one has ACEA C3 without C2, and it sits alongside PSA B71 2297 and Stellantis FPW9.55535/03, likewise listed as meeting the requirements. Motor Oil CT 5W-30 has the same ACEA C2 and C3 but no PSA code, while Motor Oil MP 5W-30 is a full-SAPS ACEA A3/B4 oil with sulphated ash of 1.3 % against 0.8 % here.
The data sheet also gives a figure that this page does not: CCS viscosity at -30 °C is 6240 mPa·s, whereas SAE J300 allows no more than 6600 mPa·s for grade 5W. How 2290 differs from 2297, 2312 and FPW9.55535/03 is explained in the article on PSA B71 codes for Peugeot and Citroën.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) 77lubricants.nl
- Product page on the manufacturer’s site 77lubricants.nl
Other 77 Lubricants oils
All 131 oils-
77 Lubricants Motor Oil CT 5W-30
Mid-SAPS ACEA C2/C3 and API SP 5W-30 engine oil meeting the requirements of MB 229.51, MB 229.52 and GM dexos2.
- ACEA C2
- ACEA C3
- API SP
- API SN
-
77 Lubricants Motor Oil DX1 5W-30
Synthetic API SQ and ILSAC GF-7A 5W-30 engine oil for petrol engines, meeting the requirements of GM dexos1 Gen 3 and Chrysler MS-6395.
- API SQ
- API SP
- API SN RC
- ILSAC GF-7A
-
77 Lubricants Motor Oil FEC 5W-30
Fully synthetic 5W-30 for Ford petrol and diesel engines and other vehicles calling for ACEA A5/B5; meets Ford WSS-M2C913-C and WSS-M2C913-D.
- ACEA A5/B5
- API SL
- Renault RN0700 (no official approval)
- Ford WSS-M2C913-D (no official approval)
-
77 Lubricants Motor Oil MP 5W-30
Fully synthetic full-SAPS ACEA A3/B4 5W-30 for Mercedes-Benz, Renault and VW cars without a diesel particulate filter.
- ACEA A3/B4
- API SP
- VW 505.00 (no official approval)
- Renault RN0700 (no official approval)
Other 5W-30 oils
-
Liqui Moly
Liqui Moly Leichtlauf Performance 5W-30
Fully synthetic low-SAPS 5W-30 oil for cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.
- ACEA C3
- ACEA C2
- API SP
- MB 229.31 (no official approval)
-
Liqui Moly
Liqui Moly Optimal New Generation 5W-30
Fully synthetic low-SAPS 5W-30 engine oil for passenger cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.
- ACEA C3
- ACEA C2
- API SP
- MB 229.31 (no official approval)
-
Liqui Moly
Liqui Moly Special Tec AA 5W-30
Fully synthetic 5W-30 engine oil for petrol engines in Asian and American cars, to API SQ and ILSAC GF-7A, with VWC 53034 approval.
- VWC 53034
- API SQ
- ILSAC GF-7A
- Chrysler MS-6395 (no official approval)
-
Liqui Moly
Liqui Moly Special Tec B FE 5W-30
Fully synthetic 5W-30 engine oil for BMW petrol engines without a particulate filter, to ACEA A5 and B5 and API SL.
- ACEA A5
- ACEA B5
- API SL
- BMW Longlife-01 FE (no official approval)