Castrol TRANSMAX Manual Transaxle 75W-90
Fully synthetic 75W-90 oil for front-wheel-drive transaxles: API GL-4 Plus, with the official VW 501.50 approval.
| Classification | |
|---|---|
| Product line | Castrol TRANSMAX 18 oils |
| SAE viscosity | 75W-90What SAE means |
| Base oil | fully synthetic |
| Intended use | gear and transmission |
| API class | What API means |
| Approvals | |
| Manufacturer approvals | What an approval means |
| Typical properties | |
| Viscosity at 40 °C | 77.58 mm²/s |
| Viscosity at 100 °C | 14.63 mm²/s |
| Viscosity index | 198 |
| Pour point | -51 °C |
| Flash point | 218 °C |
| Density | 866 kg/m³ |
Description
Castrol TRANSMAX Manual Transaxle 75W-90 is a fully synthetic gear oil from the TRANSMAX line for front-wheel-drive cars in which the manual gearbox and the final drive sit in a single housing.
The oil is rated API GL-4 Plus: its extreme-pressure properties are higher than those of a standard GL-4 oil, which matters for a heavily loaded final drive. It holds the official VW 501.50 approval, so it is also used in VW Group units with that requirement.
Typical figures: 14.63 mm²/s at 100 °C, viscosity index 198, pour point -51 °C, flash point 218 °C.
Application
Front-wheel-drive transaxles, where the gearbox and final drive share a housing and need more extreme-pressure protection than a standard GL-4 oil gives, including VW Group units that require VW 501.50.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) msdspds.castrol.com
- Technical data sheet (TDS) msdspds.castrol.com
- Product page on the manufacturer’s site castrol.com
Other Castrol oils
All 58 oils-
Castrol TRANSMAX Axle Long Life 75W-90
Fully synthetic 75W-90 oil for car and truck axles with open differentials: API GL-5, with BMW, MAN and ZF approvals.
- ZF TE-ML 21A
- ZF TE-ML 05A
- API GL-5
- ZF TE-ML 17B
-
Castrol TRANSMAX Manual Multivehicle 75W-90
Fully synthetic 75W-90 gear oil for car manual gearboxes: API GL-4, with the official MB 235.72 approval.
- MB 235.72
- API GL-4
- PSA B71 2330 (no official approval)
- Ford WSD-M2C200-C (no official approval)
-
Castrol TRANSMAX Universal LL 75W-90
Fully synthetic 75W-90 oil for truck and bus gearboxes and axles: API GL-4, GL-5, MT-1, with MAN, MB, Scania, Volvo and ZF approvals.
- ZF TE-ML 21A
- ZF TE-ML 05A
- API GL-4
- API GL-5
-
Castrol TRANSMAX Manual V 75W-80
Fully synthetic 75W-80 gear oil for manual gearboxes: API GL-4 Plus, approved to VW TL 52532-A and VW TL 52532-B.
- VW TL 52532-A
- VW TL 52532-B
- API GL-4 Plus
- VW G 052 527 (no official approval)
Other 75W-90 oils
-
Liqui Moly
Liqui Moly Fully Synthetic Gear Oil (GL5) SAE 75W-90
Fully synthetic 75W-90 gear oil to API GL-5 with MIL-L-2105C and MIL-L-2105D approvals for heavily loaded gearboxes and hypoid drives.
- MIL-L-2105D
- MIL-L-2105C
- API GL-5
-
Liqui Moly
Liqui Moly High Performance Gear Oil (GL4+) SAE 75W-90
Fully synthetic 75W-90 API GL-4 Plus gear oil for heavily loaded manual gearboxes, meeting VW 501.50 and ZF TE-ML 08.
- API GL-4 Plus
- ZF TE-ML 08 (no official approval)
- VW 501.50 (no official approval)
- Ford ESD-M2C175-A (no official approval)
-
Liqui Moly
Liqui Moly Fully Synthetic Hypoid Gear Oil (GL4/5) 75W-90
Fully synthetic 75W-90 gear oil to API GL-4, GL-5 and MT-1, meeting MB 235.8, ZF TE-ML 05A and SAE J2360.
- API GL-4
- API GL-5
- API MT-1
- ZF TE-ML 21A (no official approval)
-
Mobil
Mobil Delvac 1 Gear Oil 75W-90
Fully synthetic 75W-90 gear oil for commercial vehicle axles and gearboxes, API GL-5 and MT-1, approved by MAN, MB 235.9, Volvo and ZF.
- ZF TE-ML 21A
- ZF TE-ML 05A
- API GL-5
- API MT-1
Oils with the same approvals
-
Aral
Aral Getriebeoel EP SYNTH 75W-90
partly verified: some specifications could not be confirmed from an official source
Synthetic all-season 75W-90 API GL-4 Plus gear oil with VW 501.50 approval for manual gearboxes and axles.
- VW 501.50
- API GL-4 Plus