Mobil Delvac MX Extra 10W-40
10W-40 for naturally aspirated and turbocharged truck and plant diesels, rated API CI-4 and ACEA E7, with Volvo VDS-3 and Mack EO-N approvals.
| Classification | |
|---|---|
| Product line | Mobil Delvac MX 4 oils |
| SAE viscosity | 10W-40What SAE means |
| Base oil | synthetic |
| Intended use | commercial vehicles |
| API class | What API means |
| ACEA class | What ACEA means |
| Approvals | |
| Manufacturer approvals |
|
| Meets the requirements of | |
| Typical properties | |
| Viscosity at 40 °C | 100 mm²/s |
| Viscosity at 100 °C | 14.8 mm²/s |
| Viscosity index | 154 |
| Pour point | -36 °C |
| Flash point | 210 °C |
| Base number (TBN) | 11.1 mg KOH/g |
| Sulphated ash | 1.15 % |
| Density | 867 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Mobil Delvac MX Extra 10W-40 is an oil in the Mobil Delvac MX range for truck and off-highway diesels; its API SL and SJ petrol ratings allow its use in mixed fleets.
Official approvals: Volvo VDS-3, Renault Trucks RLD-2, Mack EO-N, Mack EO-M Plus, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, MTU Oil Category 2, DTFR 15B110. Classes: API CI-4, CH-4, SL, SJ, ACEA E7. Meets CAT ECF-2 without formal approval. Also recommended for API CG-4, CF-4, CF, ACEA A2, Cummins CES 20071, CES 20072, Detroit 7SE 270 (four-stroke engines), Renault Trucks RLD, Volvo VDS-2.
Base number 11.1 mg KOH/g, sulphated ash 1.15 %, 14.8 mm²/s at 100 °C, viscosity index 154, pour point -36 °C.
Application
Naturally aspirated and turbocharged diesel engines from European, Japanese and American makers in road haulage, including mixed fleets with petrol engines and cars, plus mining, construction, quarrying and agricultural machinery.
Worth knowing
The word Extra does not make this oil close to Mobil Delvac XHP Extra 10W-40. The viscosity at 100 °C is almost the same (14.8 and 14.6 mm²/s), but the base number here is 11.1 mg KOH/g against 15.3, and the sulphated ash 1.15 % against 1.6 %. Four approvals are shared: Volvo VDS-3, Renault Trucks RLD-2, Mack EO-N and Mack EO-M Plus. This oil also holds Cummins CES 20076, CES 20077, CES 20078, DTFR 15B110 and MTU Oil Category 2, while that one has MAN M 3277, MTU Oil Category 3 and Voith Class A.
The data sheet divides the remaining codes into two groups. API CI-4, CH-4, SL, SJ, ACEA E7 and CAT ECF-2 are given as “meets or exceeds”; ACEA A2, API CG-4, CF-4, CF, Cummins CES 20071, CES 20072, Renault Trucks RLD, Volvo VDS-2 and Detroit 7SE 270 are only recommendations, the last limited to four-stroke engines. Under the new name, Mobil Delvac Modern 10W-40 Super Defense, ACEA B2 and MAN M 3275-1 join the recommendations. What the B in DTFR 15B110 means and how the Volvo, Renault Trucks and Mack codes are linked is explained in the article on truck and bus approvals.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Product page on the manufacturer’s site mobil.com
Other Mobil oils
All 150 oils-
Mobil Delvac MX 15W-40
15W-40 for naturally aspirated and turbocharged truck and plant diesels, rated API CI-4 and ACEA E7, with Volvo VDS-3 and Renault Trucks RLD-2 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA B2
-
Mobil Delvac Modern 10W-40 Super Defense
Synthetic full-SAPS 10W-40 for diesel trucks and equipment without a particulate filter, rated ACEA E7 and API CI-4, approved to Volvo VDS-3 and Mack EO-N.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA A2
-
Mobil Delvac Modern 10W-40 Super Defense V1
Synthetic full-ash 10W-40 for truck and plant diesels, rated API CH-4, with MAN M 3277 and Volvo VDS-3 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- API CH-4
- Mack EO-N
-
Mobil Delvac XHP Extra 10W-40
Synthetic full-ash 10W-40 for truck and plant diesels on extended drains, with MAN M 3277, Volvo VDS-3 and Voith Class A approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- API CH-4
- API CI-4
Other 10W-40 oils
-
Liqui Moly
Liqui Moly Truck Low-friction Motor Oil 10W-40
Synthetic full-SAPS 10W-40 oil for truck diesels and mixed fleets, with ACEA E7 and API CI-4 and Volvo VDS-3 and Mack EO-N approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA A3
-
Eni
Eni i-Sigma top 10W-40
A synthetic 10W-40 oil for turbocharged lorry diesels, rated ACEA E4, E7 and API CI-4, with MAN M 3277, Volvo VDS-3 and Mack EO-N approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E4
- ACEA E7
-
Eni
Eni i-Sigma special TMS 10W-40
A synthetic low-SAPS 10W-40 oil for diesels with exhaust after-treatment, rated ACEA E6, E9 and API CI-4, with Volvo VDS-3 and Mack EO-N approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA E6
-
Eni
Eni i-Sigma universal 10W-40
A synthetic 10W-40 oil for mixed fleets, rated ACEA E7, A3/B4 and API CI-4, with Volvo VDS-3, Mack EO-N and Renault Trucks RLD-2 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA A3/B3
- ACEA A3/B4
Oils with the same approvals
-
Aral
Aral Turboral 10W-40
Synthetic 10W-40 oil to ACEA E7 and API CI-4 for mixed fleets of trucks, buses and machinery, approved to DTFR 15B110 and Volvo VDS-3.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- API CI-4
-
Shell
Shell Rimula R5 E 10W-40
Fuel-economy API CI-4 and ACEA E7 10W-40 diesel oil for severe service, with Volvo VDS-3, DTFR 15B110 and Renault Trucks RLD-2 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- ACEA E5
-
Elf
Elf Performance Pro 700 15W-40
15W-40 engine oil rated ACEA E7 and API CI-4 for truck diesels, with Cummins CES 20078, Mack EO-N and Volvo VDS-3 approvals.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- API CH-4
-
Castrol
Castrol CRB Turbomax 10W-40 CI-4/SL/E7
10W-40 diesel oil to ACEA E7 and API CI-4 for trucks, buses and plant without a particulate filter, approved to Volvo VDS-3 and Mack EO-N.
- Volvo VDS-3
- Renault Trucks RLD-2
- ACEA E7
- API CI-4