77 Lubricants Engine Oil TLE 10W-40

77 Lubricants77 Lubricants Engine Oil TLE linecommercial vehicles10W-40

Fully synthetic mid-SAPS 10W-40 oil for truck diesels with a particulate filter, with Volvo VDS-4.5 and DTFR 15C110 approvals.

Classification
Product line 77 Lubricants Engine Oil TLE 4 oils
SAE viscosity 10W-40What SAE means
Base oil fully synthetic
Intended use commercial vehicles
API class What API means
ACEA class What ACEA means
JASO class
Approvals
Manufacturer approvals What an approval means
Meets the requirements of
Typical properties
Viscosity at 40 °C 91 mm²/s
Viscosity at 100 °C 14.6 mm²/s
Viscosity index 155
Pour point -33 °C
Flash point 224 °C
Base number (TBN) 10 mg KOH/g
Sulphated ash 0.9 %
Density 860 kg/m³

The car maker has not officially approved the entries in the “Meets the requirements of” row.

Description

77 Lubricants Engine Oil TLE 10W-40 is a fully synthetic mid-SAPS engine oil for diesel engines in trucks and vans from Euro 4 to Euro 6 with a particulate filter, EGR and SCR.

It is rated ACEA E7, E8 and E11, API CK-4 and JASO DH-2, with official DTFR 15C110, Volvo VDS-4.5, Mack EOS-4.5 and Renault Trucks RLD-3 approvals. It meets MB 228.51, DTFR 15C100, MAN M 3477, MAN M 3775, CAT ECF-3, Cummins CES 20086, DDC DFS 93K222, Deutz DQC IV-18 LA and MTU Oil Category 3.1 without formal approval.

Typical figures: viscosity 14.6 mm²/s at 100 °C, viscosity index 155, base number 10 mg KOH/g, sulphated ash 0.9 %, flash point 224 °C.

Application

Diesel engines in trucks and vans from Euro 4 to Euro 6 with a diesel particulate filter (DPF) and EGR and/or SCR systems.

Worth knowing

The MB 228.51 entry in this oil’s list and the DTFR 15C110 approval refer to one requirement under two names; how a Mercedes-Benz number became a Daimler Truck code is explained on the page about the MB 228.51 approval. In the data sheet they have drifted apart: DTFR 15C110 sits on the “Approved” line, while “(MB 228.51)” in brackets ended up at the bottom of the “Exceeds” block, next to DTFR 15C100.

Engine Oil Special UHPD 10W-40 has the same viscosity grade, API CK-4 and ACEA E7, E8, E11, and it holds all four approvals of this oil as well. Deutz DQC IV-18 LA and MTU Oil Category 3.1 are approved there but only declared here; the base number is 13.5 against 10 mg KOH/g, the sulphated ash 0.98 against 0.9 %. Both oils carry MAN M 3477 as the maker’s statement: MAN no longer issues new approvals under this code, and in the catalogue no oil has such an approval. MAN M 3677, backward compatible with it, is named in the TLE range only in the 5W-30 data sheet.

Data current as of Check the label and the current product data sheet before you buy.

Sources

Related articles

Other 77 Lubricants oils

All 131 oils

  • 77 Lubricants Engine Oil TLE 5W-30

    Fully synthetic mid-SAPS 5W-30 oil for truck diesels with a particulate filter, with Volvo VDS-4.5 and DTFR 15C110 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E7
    • ACEA E8

  • 77 Lubricants Engine Oil TLE 10W-30

    Fully synthetic mid-SAPS 10W-30 oil for truck diesels with a particulate filter, with Volvo VDS-4.5 and DTFR 15C100 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E7
    • ACEA E8

  • 77 Lubricants Engine Oil TLE 15W-40

    Mid-SAPS ACEA E6, E7, E11 and API CK-4 15W-40 oil for truck diesels with a particulate filter, with Volvo VDS-4.5 approval.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E7

  • 77 Lubricants Engine Oil Special UHPD 10W-40

    Fully synthetic mid-SAPS 10W-40 oil for Euro 5 and Euro 6 truck diesels with a particulate filter, with Volvo VDS-4.5 and DTFR 15C110 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E4
    • ACEA E7

Other 10W-40 oils

  • Castrol

    Castrol VECTON Long Drain 10W-40 E8/E11

    Fully synthetic low-ash 10W-40 oil for truck and bus diesels to ACEA E11 and API CK-4, with MAN M 3775 and Volvo VDS-4.5 approvals.

    • CAT ECF-3
    • Renault Trucks RLD-3
    • ACEA E6
    • ACEA E7
  • Liqui Moly

    Liqui Moly Top Tec Truck 4050 10W-40

    Synthetic low-ash 10W-40 oil for Euro IV-VI truck and bus diesels, with ACEA E6/E11 and API CK-4 and Volvo VDS-4.5 and Mack EOS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E7
  • Mobil

    Mobil Delvac Modern 10W-40 Advanced Protection

    Synthetic low-ash 10W-40 for Euro V/VI diesels with a particulate filter, rated API CK-4 and ACEA E8, approved to MAN M 3775 and Volvo VDS-4.5.

    • Volvo VDS-3
    • Renault Trucks RLD-2
    • ACEA E4
    • ACEA E7
  • Mobil

    Mobil Delvac XHP ESP 10W-40

    Synthetic 10W-40 for Euro V/VI diesels with particulate filters, rated API CK-4 and ACEA E7, with MAN M 3775 and Volvo VDS-4.5 approvals.

    • Volvo VDS-3
    • Renault Trucks RLD-2
    • ACEA E4
    • ACEA E7

Oils with the same approvals

  • Liqui Moly

    Liqui Moly Top Tec Truck 4350 5W-30

    Synthetic low-SAPS 5W-30 for truck and bus diesels, ACEA E6/E7/E8/E9/E11, with MAN M 3677, Scania LDF-4 and Volvo VDS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E7
  • Elf

    Elf Performance Pro 2000 10W-30

    Synthetic low-SAPS 10W-30 truck diesel oil rated ACEA E6, E11 and API CK-4, with Volvo VDS-4.5 and Cummins CES 20086 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E11
    • ACEA E6
  • Elf

    Elf Performance Pro 2000 10W-40

    Low-SAPS 10W-40 oil for truck diesel and gas engines, rated ACEA E6, E11 and API CK-4, with Volvo VDS-4.5 and Mack EOS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E11
    • ACEA E6
  • Eni

    Eni i-Sigma top MS 10W-30

    A synthetic low-SAPS 10W-30 oil for diesels with exhaust after-treatment, rated ACEA E9, E11 and API CK-4, with Volvo VDS-4.5 and Mack EOS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E7
    • ACEA E11