Eni Rotra FE 75W-90
Synthetic 75W-90 API GL-4 gear oil for Audi and Volkswagen manual gearboxes, meeting the requirements of VW 501.50.
| Classification | |
|---|---|
| Product line | Eni Rotra 21 oils |
| SAE viscosity | 75W-90What SAE means |
| Base oil | synthetic |
| Intended use | gear and transmission |
| API class | What API means |
| Approvals | |
| Meets the requirements of | What an approval means |
| Typical properties | |
| Viscosity at 40 °C | 92 mm²/s |
| Viscosity at 100 °C | 15.1 mm²/s |
| Viscosity index | 180 |
| Brookfield viscosity at -40 °C | 115000 mPa·s |
| Pour point | -48 °C |
| Flash point | 190 °C |
| Density | 870 kg/m³ |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Eni Rotra FE 75W-90 is a synthetic oil for manual transaxles, where the gearbox and final drive share one housing, in front-wheel-drive Audi and Volkswagen cars. Its very low viscosity in the cold makes gear changes easier after a cold start.
The oil is rated API GL-4. According to its maker, it meets the requirements of VW 501.50 (factory designation G 50), without formal Volkswagen approval.
Typical figures: kinematic viscosity 92 mm²/s at 40 °C and 15.1 mm²/s at 100 °C, viscosity index 180, pour point -48 °C, flash point 190 °C, density 870 kg/m³ and low-temperature viscosity 115,000 mPa·s at -40 °C.
Application
Manual transaxles in front-wheel-drive Audi and Volkswagen cars that need a VW 501.50 (G 50) oil.
Worth knowing
In its applications section, Eni’s data sheet calls this oil an API “GL-4+” gear lubricant, while the specification section records plain API GL-4. There is no “GL-4+” category in the API 1560 list, so the “plus” is the oil maker’s wording, not an API class. How GL-4 differs from GL-5, and why double or “enhanced” markings on the can are no substitute for the carmaker’s requirement, is explained in the article “Gear oil: GL-4 or GL-5, 75W-90 or 80W-90?”.
Eni Rotra FE 75W-80 also carries the letters FE, but its entry has no VW 501.50: it claims four ZF TE-ML classes and has 9.1 mm²/s at 100 °C against 15.1 mm²/s here. The code is also absent from the other 75W-90 oils of the Rotra line, from MP and LSX to A/R and HY DB Synth. The VW 501.50 page lists six oils, only two of which hold an official approval.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
- Product page on the manufacturer’s site oilproducts.eni.com
Other Eni oils
All 140 oils-
Eni Rotra A/R 75W-90
Fully synthetic 75W-90 gear oil rated API GL-5 and MT-1 and meeting SAE J2360, for gearboxes and limited-slip differentials.
- API GL-5
- API MT-1
- ZF TE-ML 21A (no official approval)
- ZF TE-ML 05A (no official approval)
-
Eni Rotra HY DB Synth 75W-90
Fully synthetic 75W-90 gear oil rated API GL-4 for the manual gearboxes of Mercedes-Benz lorries and light vehicles.
- API GL-4
- ZF TE-ML 08 (no official approval)
- DTFR 13B110 (no official approval)
-
Eni Rotra LSX 75W-90
Fully synthetic 75W-90 gear oil rated API GL-4, GL-5 and MT-1, with official MAN and ZF approvals for gearboxes and axles.
- ZF TE-ML 21A
- ZF TE-ML 05A
- API GL-4
- API GL-5
-
Eni Rotra MP 75W-90
Synthetic 75W-90 gear oil for manual gearboxes and axles, meeting API GL-4, GL-5 and MT-1, with official ZF approvals.
- ZF TE-ML 21A
- ZF TE-ML 05A
- API MT-1
- API GL-4
Other 75W-90 oils
-
Liqui Moly
Liqui Moly Top Tec MTF 5400 75W-90
Synthetic 75W-90 API GL-4 gear oil meeting the requirements of VW 501.50, MB 235.72 and BMW MTF LT-4.
- API GL-4
- VW 501.50 (no official approval)
- Ford WSD-M2C200-C (no official approval)
- BMW MTF LT-4 (no official approval)
-
Mobil
Mobil Delvac Ultra SCA 75W-90
75W-90 gear oil for Scania and MAN truck gearboxes on extended drain intervals, with MAN 341 Type GA2 approval.
- MAN 341 Type GA2
- Scania STO 2:0 G (no official approval)
-
Motul
Motul MOTYLGEAR 75W-90
Synthetic API GL-4 and GL-5 75W-90 gear oil for manual gearboxes, transfer cases and hypoid axles.
- API GL-5
- API GL-4
- MIL-L-2105D (no official approval)
-
Shell
Shell Spirax S5 ATE 75W-90
Synthetic 75W-90 gear oil rated API GL-4, GL-5 and MT-1, with the MB 236.26 approval, for heavily loaded car drivetrains.
- MB 236.26
- API GL-4
- API GL-5
- API MT-1