Mobil Delvac Modern 10W-40 Full Protection V4

MobilMobil Delvac Modern linecommercial vehicles10W-40

Synthetic 10W-40 for Euro V/VI diesels with particulate filters and SCR, rated ACEA E8, with DTFR 15C110 and MTU Oil Category 3.1 approvals.

Classification
Product line Mobil Delvac Modern 13 oils
SAE viscosity 10W-40What SAE means
Base oil synthetic
Intended use commercial vehicles
ACEA class What ACEA means
Approvals
Manufacturer approvals What an approval means
Meets the requirements of
Typical properties
Viscosity at 40 °C 101.4 mm²/s
Viscosity at 100 °C 14.7 mm²/s
Pour point -36 °C
Density 867 kg/m³

The car maker has not officially approved the entries in the “Meets the requirements of” row.

Description

Mobil Delvac Modern 10W-40 Full Protection V4 is a synthetic-technology oil with a reduced content of ash-forming additives, made for heavy-duty Euro V/VI diesels with exhaust after-treatment.

Official approvals: DTFR 15C110 and MTU Oil Category 3.1. The oil is rated ACEA E8 and, without formal approval, meets the requirements of DAF Extended Drain; ExxonMobil recommends it where MAN M 3477 or ACEA E6 is specified.

Phosphorus 0.077 %, 14.7 mm²/s at 100 °C, pour point -36 °C.

Application

Euro V/VI truck and bus diesel engines with particulate filters, SCR, CRT, oxidation catalysts or EGR, on long-haul and short-haul work, running on low-sulphur diesel or many biodiesel blends.

Worth knowing

According to Mobil’s renaming table this is the new name of Mobil Delvac HD 10W-40, yet the figures in the data sheets do not match: 14.7 against 13.7 mm²/s at 100 °C, 101.4 against 91 mm²/s at 40 °C, pour point -36 against -42 °C. The codes shared with HD are MTU Oil Category 3.1, DAF Extended Drain, MAN M 3477 and ACEA E6. What is new here is ACEA E8 and the DTFR 15C110 approval. Daimler Truck renamed MB 228.51 to this code without changing the requirements, so instructions citing the old number are met by this one; the correspondence table is in the article on truck approvals: DTFR, MAN and Volvo.

The V4 data sheet gives no API classes. If the vehicle’s documentation requires API CK-4, Volvo VDS-4.5 or MAN M 3775, the same SAE 10W-40 viscosity, ACEA E8 class and DTFR 15C110 are combined in Mobil Delvac Modern 10W-40 Advanced Protection: its VDS-4.5 and M 3775 are approvals, and CK-4 is stated as compliance. The typical viscosity at 100 °C is lower there, 13.7 mm²/s.

Data current as of Check the label and the current product data sheet before you buy.

Sources

Related articles

Other Mobil oils

All 150 oils

  • Mobil Delvac Modern 10W-40 Advanced Protection

    Synthetic low-ash 10W-40 for Euro V/VI diesels with a particulate filter, rated API CK-4 and ACEA E8, approved to MAN M 3775 and Volvo VDS-4.5.

    • Volvo VDS-3
    • Renault Trucks RLD-2
    • ACEA E4
    • ACEA E7

  • Mobil Delvac Modern 10W-40 Super Defense

    Synthetic full-SAPS 10W-40 for diesel trucks and equipment without a particulate filter, rated ACEA E7 and API CI-4, approved to Volvo VDS-3 and Mack EO-N.

    • Volvo VDS-3
    • Renault Trucks RLD-2
    • ACEA E7
    • ACEA A2

  • Mobil Delvac Modern 10W-40 Super Defense V1

    Synthetic full-ash 10W-40 for truck and plant diesels, rated API CH-4, with MAN M 3277 and Volvo VDS-3 approvals.

    • Volvo VDS-3
    • Renault Trucks RLD-2
    • API CH-4
    • Mack EO-N

  • Mobil Delvac Modern 5W-30 Extreme Protection

    Synthetic low-ash 5W-30 for truck diesels with particulate filters, rated API CK-4 and ACEA E11, with DTFR 15C110 and Volvo VDS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E8
    • ACEA E11

Other 10W-40 oils

  • Shell

    Shell Rimula R6 LM 10W-40

    Synthetic low-SAPS 10W-40 for truck and bus diesels, rated ACEA E11 and API CK-4, with DTFR 15C110 and Volvo VDS-4.5 approvals.

    • CAT ECF-3
    • Renault Trucks RLD-3
    • ACEA E6
    • ACEA E8
  • Aral

    Aral MegaTurboral LA 10W-40

    Low-SAPS synthetic 10W-40 oil to ACEA E6, E9 and API CJ-4 for truck diesels, approved to DTFR 15C110 and Volvo VDS-4.5.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E7
  • Liqui Moly

    Liqui Moly Top Tec Truck 4050 10W-40

    Synthetic low-ash 10W-40 oil for Euro IV-VI truck and bus diesels, with ACEA E6/E11 and API CK-4 and Volvo VDS-4.5 and Mack EOS-4.5 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E7
  • Shell

    Shell HD5 Fleet 10W-40

    partly verified

    Synthetic low-SAPS 10W-40 engine oil rated ACEA E6 and E8, with the DTFR 15C110 approval, for trucks on extended drain intervals.

    • DTFR 15C110
    • ACEA E6
    • ACEA E8

Oils with the same approvals

  • 77 Lubricants

    77 Lubricants Engine Oil Special UHPD 10W-40

    Fully synthetic mid-SAPS 10W-40 oil for Euro 5 and Euro 6 truck diesels with a particulate filter, with Volvo VDS-4.5 and DTFR 15C110 approvals.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E4
    • ACEA E7
  • Castrol

    Castrol VECTON Long Drain 5W-30 E6/E9

    Fully synthetic 5W-30 oil for Euro V/VI truck and bus diesels to ACEA E9 and API CK-4, with MAN M 3677 and Volvo VDS-4.5 approvals.

    • CAT ECF-3
    • Renault Trucks RLD-3
    • ACEA E6
    • ACEA E8
  • Castrol

    Castrol VECTON Long Drain 10W-40 E8/E11

    Fully synthetic low-ash 10W-40 oil for truck and bus diesels to ACEA E11 and API CK-4, with MAN M 3775 and Volvo VDS-4.5 approvals.

    • CAT ECF-3
    • Renault Trucks RLD-3
    • ACEA E6
    • ACEA E7
  • Aral

    Aral SuperTurboral LA 5W-30

    Low-SAPS synthetic 5W-30 oil to ACEA E9 and API CK-4 for truck diesels, approved to MAN M 3677, Scania LDF-4 and Volvo VDS-4.5.

    • Renault Trucks RLD-3
    • Mack EOS-4.5
    • ACEA E6
    • ACEA E8