Liqui Moly ATF III (yellow)
Yellow Dexron III-level fluid for automatic and manual gearboxes and hydraulics, meeting GM Dexron III-G, Ford MERCON and MB 236.1 without approvals.
| Classification | |
|---|---|
| Product line | Liqui Moly ATF 2 oils |
| Intended use | gear and transmission |
| Approvals | |
| Meets the requirements of |
|
| Typical properties | |
| Viscosity at 40 °C | 34.1 mm²/s |
| Viscosity at 100 °C | 7.4 mm²/s |
| Viscosity index | 192 |
| Pour point | -45 °C |
| Flash point | 212 °C |
| Sulphated ash | 0.1 % |
| Density | 855 kg/m³ |
| Pack sizes | 1 L, 5 L |
The car maker has not officially approved the entries in the “Meets the requirements of” row.
Description
Liqui Moly ATF III (yellow) is a Dexron III-level automatic transmission fluid dyed yellow. It is intended for automatic and manual gearboxes, torque converters, power steering and vehicle hydraulic systems.
The fluid holds no official approvals. The manufacturer states that it meets the requirements of GM Dexron III-G, Ford MERCON, MB 236.1, Allison C-4, CAT TO-2, MAN 339 Type L1, V1 and Z1, Voith H55.6335.xx and ZF TE-ML 04D, 14A and 17C.
Typical figures: 7.4 mm²/s at 100 °C, viscosity index 192, pour point -45 °C. Available in 1 and 5 litre packs.
Application
Automatic and manual gearboxes, torque converters, power steering and vehicle hydraulic systems, where the unit manufacturer's specification matches the fluid.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) pim.liqui-moly.de
- Product page on the manufacturer’s site liqui-moly.com
- Manufacturer’s catalogue pim.liqui-moly.com
Other Liqui Moly oils
All 150 oils-
Liqui Moly ATF III
Dexron III-level fluid for automatic and manual gearboxes and hydraulics, with ZF TE-ML 03D, 04D, 14A, 17C and Voith H55.6335.xx approvals.
- ZF TE-ML 04D
- Voith H55.6335.xx
- ZF TE-ML 14A
- ZF TE-ML 17C
-
Liqui Moly Classic Transmission Oil SAE 90
Mineral SAE 90 gear oil to API GL-1, GL-2 and GL-3 for lightly loaded manual gearboxes in classic cars and motorcycles.
- API GL-1
- API GL-2
- API GL-3
-
Liqui Moly Classic Transmission Oil SAE 140
Mineral SAE 140 gear oil to API GL-1, GL-2 and GL-3 for lightly loaded gearboxes and axles in classic cars and motorcycles.
- API GL-1
- API GL-2
- API GL-3
-
Liqui Moly Dual Clutch Transmission Oil 8100
Hydrocracked fluid for wet dual-clutch gearboxes that meets BMW DCTF-1, VW G 052 182, MB 236.21 and Ford WSS-M2C936-A.
- Ford WSS-M2C936-A (no official approval)
- Mitsubishi Dia Queen SSTF-1 (no official approval)
- BMW DCTF-1 (no official approval)
- Fiat 9.55550-MZ6 (no official approval)