SUBARU BY MOTUL 5W-30

MotulMotul Subaru linepassenger cars5W-30 data partly verified

Fully synthetic mid-SAPS ACEA C2 and API SP 5W-30 oil for Subaru boxer petrol and diesel engines.

Specifications: SUBARU BY MOTUL 5W-30
Classification
Product line Motul Subaru 2 oils
SAE viscosity 5W-30What SAE means
Base oil fully synthetic
Intended use passenger cars
API class What API means
ACEA class What ACEA means
Typical properties
Viscosity at 40 °C 72.4 mm²/s
Viscosity at 100 °C 12.1 mm²/s
Viscosity index 164
HTHS viscosity 3.5 mPa·s
Pour point -41 °C
Flash point 227 °C
Base number (TBN) 8 mg KOH/g
Sulphated ash 0.70 %
Density 848 kg/m³
Pack sizes 1 L, 5 L

Description

SUBARU BY MOTUL 5W-30 is a fully synthetic engine oil that Motul produces jointly with Subaru. It is intended for Subaru boxer petrol and diesel engines of all generations meeting Euro 4-6. According to Motul, using it keeps the Subaru factory warranty intact.

The oil is rated ACEA C2 and API SP. Its mid-SAPS formulation makes it compatible with particulate filters and catalytic converters.

Typical figures: kinematic viscosity 12.1 mm²/s at 100 °C, viscosity index 164, HTHS 3.5 mPa·s, pour point -41 °C, base number 8 mg KOH/g, sulphated ash 0.70 %. Available in 1 and 5 litres.

Application

Subaru petrol and diesel engines of all generations meeting Euro 4-6 where the manufacturer specifies ACEA C2 or API SP in the 5W-30 grade.

Worth knowing

According to the data sheet, this oil may be topped up only with one that meets ACEA C2. The rest of the document is built around this class too: it frames the Subaru requirement in terms of C2, mentions API SP as an additional option for engines with such a requirement, and in the carmaker column gives a note about the Subaru warranty instead of a number.

Close figures decide nothing here. Motul LPG-CNG 5W-30 has the same 12.1 mm²/s at 100 °C, HTHS of 3.5 mPa·s and ash of 0.70 %, but it is class C3 with API SN Plus, without C2. POWER SUV 5W-30 keeps API SP, but again with C3 only. Motul 6100 SYN-CLEAN FE 5W-30, for example, has both of this oil’s codes and the same 12.1 mm²/s and 3.5 mPa·s, and additionally states C3. The reverse case is 8100 ECO-CLEAN 5W-30: it has class C2 at an HTHS of 3.1 mPa·s, since the lower limit of this class is 2.9 mPa·s. Oils with C2 are collected on the class page; its sister oil SUBARU BY MOTUL 0W-20 is not among them.

Data current as of data partly verifiedsome specifications could not be confirmed from an official sourceCheck the label and the current product data sheet before you buy.

Sources: official sources of the data on this oil

Other Motul oils

All 150 oils
  • SUBARU BY MOTUL 0W-20

    partly verified: some specifications could not be confirmed from an official source

    Fully synthetic fuel-saving API SP RC and ILSAC GF-6A 0W-20 oil for Subaru boxer petrol engines.

    • API SP RC
    • ILSAC GF-6A
  • Motul 2100 PROTECT ECO 5W-30

    partly verified: some specifications could not be confirmed from an official source

    Synthetic fuel-economy 5W-30 engine oil rated ACEA A5/B5 and API SN except for the phosphorus limit, for petrol cars of Asian makes.

    • ACEA A5/B5
  • Motul 300V POWER 5W-30

    Fully synthetic ester-based 5W-30 racing oil for engines specified for 5W-30 that see track or high-rpm use.

  • Motul 300V POWER RACING 5W-30

    partly verified: some specifications could not be confirmed from an official source

    Fully synthetic ester-based 5W-30 racing oil for rallying and short-distance racing.

Other 5W-30 oils

  • Liqui Moly

    Liqui Moly Leichtlauf Performance 5W-30

    Fully synthetic low-SAPS 5W-30 oil for cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.

    • ACEA C3
    • ACEA C2
    • API SP
    • MB 229.31 (no official approval)
  • Liqui Moly

    Liqui Moly Optimal New Generation 5W-30

    Fully synthetic low-SAPS 5W-30 engine oil for passenger cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.

    • ACEA C3
    • ACEA C2
    • API SP
    • MB 229.31 (no official approval)
  • Liqui Moly

    Liqui Moly Special Tec AA 5W-30

    Fully synthetic 5W-30 engine oil for petrol engines in Asian and American cars, to API SQ and ILSAC GF-7A, with VWC 53034 approval.

    • VWC 53034
    • API SQ
    • ILSAC GF-7A
    • Chrysler MS-6395 (no official approval)
  • Liqui Moly

    Liqui Moly Special Tec B FE 5W-30

    Fully synthetic 5W-30 engine oil for BMW petrol engines without a particulate filter, to ACEA A5 and B5 and API SL.

    • ACEA A5
    • ACEA B5
    • API SL
    • BMW Longlife-01 FE (no official approval)