Motul 8100 POWER 5W-30
Fully synthetic API SP 5W-30 oil with esters for uprated petrol and diesel cars driven hard.
| Classification | |
|---|---|
| Product line | Motul 8100 28 oils |
| SAE viscosity | 5W-30What SAE means |
| Base oil | fully synthetic |
| Intended use | passenger cars |
| API class | What API means |
| Typical properties | |
| Viscosity at 40 °C | 64.2 mm²/s |
| Viscosity at 100 °C | 10.8 mm²/s |
| Viscosity index | 160 |
| HTHS viscosity | 3.2 mPa·s |
| Pour point | -45 °C |
| Flash point | 248 °C |
| Base number (TBN) | 7.9 mg KOH/g |
| Sulphated ash | 0.84 % |
| Density | 844 kg/m³ |
| Pack sizes | 1 L, 5 L, 60 L |
Description
Motul 8100 POWER 5W-30 is a fully synthetic engine oil from the 8100 line, blended with esters in a formulation the maker derives from its motorsport oils. It is intended for tuned and powerful petrol and diesel car engines that regularly run at high revs and under heavy load.
The oil is rated API SP; the data sheet lists no car-maker approvals.
Typical figures: kinematic viscosity 10.8 mm²/s at 100 °C, viscosity index 160, HTHS 3.2 mPa·s, pour point -45 °C, flash point 248 °C, sulphated ash 0.84 %. Available in 1 to 60 litres.
It is designed for spirited road driving and track days rather than for extended manufacturer service intervals.
Application
Tuned and highly uprated petrol and diesel cars run across a wide range of revs and temperatures, including occasional track days, where an API SP 5W-30 oil is acceptable for the engine.
Data current as of Check the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) azupim01.motul.com
- Technical data sheet (TDS) azupim01.motul.com
- Product page on the manufacturer’s site motul.com
- Product page on the manufacturer’s site motul.com
Other Motul oils
All 150 oils-
Motul 8100 ECO-CLEAN 5W-30
A fully synthetic mid-SAPS 5W-30 oil rated ACEA C2 and API SN for petrol and diesel engines with a particulate filter.
- ACEA C2
- API SN
- PSA B71 2290 (no official approval)
- Fiat 9.55535-S1 (no official approval)
-
Motul 8100 ECO-CLEAN+ 5W-30
A fully synthetic low-SAPS 5W-30 oil rated ACEA C1 and approved to Ford WSS-M2C934-B and JLR STJLR.03.5005.
- JLR STJLR.03.5005
- Ford WSS-M2C934-B
- ACEA C1
- JASO DL-1
-
Motul 8100 ECO-LITE 5W-30
A fully synthetic fuel-saving 5W-30 oil rated API SQ RC and ILSAC GF-7A for modern petrol engines.
- API SQ RC
- ILSAC GF-7A
- Chrysler MS-6395 (no official approval)
- GM dexos1 Gen 3 (no official approval)
-
Motul 8100 ECO-LITE GEN3 5W-30
partly verified: some specifications could not be confirmed from an official source
Fully synthetic fuel-saving 5W-30 petrol engine oil rated API SQ RC and ILSAC GF-7A, with GM dexos1 Gen 3 approval.
- GM dexos1 Gen 3
- API SQ RC
- ILSAC GF-7A
- Chrysler MS-6395 (no official approval)
Other 5W-30 oils
-
Liqui Moly
Liqui Moly Leichtlauf Performance 5W-30
Fully synthetic low-SAPS 5W-30 oil for cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.
- ACEA C3
- ACEA C2
- API SP
- MB 229.31 (no official approval)
-
Liqui Moly
Liqui Moly Optimal New Generation 5W-30
Fully synthetic low-SAPS 5W-30 engine oil for passenger cars with or without a particulate filter, to ACEA C3 and API SP, meeting MB 229.31.
- ACEA C3
- ACEA C2
- API SP
- MB 229.31 (no official approval)
-
Liqui Moly
Liqui Moly Special Tec AA 5W-30
Fully synthetic 5W-30 engine oil for petrol engines in Asian and American cars, to API SQ and ILSAC GF-7A, with VWC 53034 approval.
- VWC 53034
- API SQ
- ILSAC GF-7A
- Chrysler MS-6395 (no official approval)
-
Liqui Moly
Liqui Moly Special Tec B FE 5W-30
Fully synthetic 5W-30 engine oil for BMW petrol engines without a particulate filter, to ACEA A5 and B5 and API SL.
- ACEA A5
- ACEA B5
- API SL
- BMW Longlife-01 FE (no official approval)

