Motul 300V TROPHY 0W-40 AP
Fully synthetic ester-based 0W-40 racing oil for race-prepared petrol and diesel engines.
| Classification | |
|---|---|
| Product line | Motul 300V 14 oils |
| SAE viscosity | 0W-40What SAE means |
| Base oil | fully synthetic |
| Intended use | passenger cars |
| Typical properties | |
| Viscosity at 40 °C | 75.7 mm²/s |
| Viscosity at 100 °C | 13.6 mm²/s |
| Viscosity index | 186 |
| HTHS viscosity | 3.9 mPa·s |
| Pour point | -51 °C |
| Flash point | 222 °C |
| Base number (TBN) | 8.2 mg KOH/g |
| Density | 848 kg/m³ |
| Pack sizes | 2 L |
Description
Motul 300V TROPHY 0W-40 AP is a fully synthetic, ester-based racing oil from the 300V line (Motul ESTER Core technology). It is intended for race-prepared petrol and diesel engines operating over a wide range of engine speeds and temperatures.
Motul lists no API or ACEA categories and no car-maker approvals, stating that the oil goes beyond current motorsport standards.
Typical figures: kinematic viscosity 13.6 mm²/s at 100 °C, viscosity index 186, HTHS 3.9 mPa·s, pour point -51 °C, base number 8.2 mg KOH/g. Available in 2 litres.
This is an oil for competition use, so the choice should be agreed with the engine builder.
Application
Race-prepared petrol and diesel engines operating over a wide range of engine speeds and temperatures.
Data current as of data partly verifiedsome specifications could not be confirmed from an official sourceCheck the label and the current product data sheet before you buy.
Sources: official sources of the data on this oil
- Technical data sheet (TDS) azupim01.motul.com
- Product page on the manufacturer’s site motul.com
Other Motul oils
All 150 oils-
Motul 300V COMPETITION 0W-40
Fully synthetic ester-based 0W-40 racing oil with the fastest cold-start flow of the COMPETITION series.
-
Motul 300V POWER 0W-8
partly verified: some specifications could not be confirmed from an official source
Fully synthetic ester-based 0W-8 racing oil for engines built to run on an extremely thin oil.
-
Motul 300V POWER 0W-16
partly verified: some specifications could not be confirmed from an official source
Fully synthetic ester-based 0W-16 racing oil for petrol and diesel engines designed for a very thin oil.
-
Motul 300V POWER 0W-20
Fully synthetic ester-based 0W-20 racing oil for modern engines specified for 0W-20 that are used on track.
Other 0W-40 oils
-
Liqui Moly
Liqui Moly Synthoil Energy 0W-40
Fully synthetic 0W-40 ACEA A3/B4 and API SN oil meeting the requirements of BMW Longlife-98, MB 229.3, Porsche A40 and VW 502.00/505.00.
- ACEA A3
- ACEA B4
- API SN
- VW 505.00 (no official approval)
-
Mobil
Mobil 1 ESP X3 0W-40
Fully synthetic 0W-40 for high-performance petrol engines with a GPF, approved to MB 229.51, MB 229.52 and GM dexos2.
- MB 229.51
- MB 229.52
- ACEA C3
- API SN Plus
-
Mobil
Mobil 1 FS 0W-40
Fully synthetic full-SAPS 0W-40 for cars without a particulate filter, approved to MB 229.5, VW 502.00/505.00 and BMW Longlife-01.
- VW 505.00
- VW 502.00
- ACEA A3/B4
- API CF
-
Shell
Shell Helix Ultra 0W-40
Fully synthetic 0W-40 engine oil rated API SP and ACEA A3/B4, approved to MB 229.5, VW 502.00/505.00 and Renault RN0700/RN0710.
- VW 505.00
- Renault RN0700
- ACEA A3/B3
- ACEA A3/B4


